Product Description:
Sunshine presents this skylight window. It uses a high-precision 6063-T6 aluminum profile. The main material wall thickness is ≥3.0mm. A 45-degree corner gluing method is applied. Waterproof corner glue is injected into the slot. Two layers of sealant provide waterproofing. EPDM sealing strips are automotive grade. They withstand temperatures from -50℃ to 120℃. The motorized system comes from German Dunkenmotoren. Maximum length is 3000mm. Maximum area is 4 square meters. Glass is laminated and low-E: 5+1.14PVB+5+21A+6LOW-E. Surface treatment uses a fluorocarbon triple coating. The system includes smart home voice control. A backup power supply and remote control are also available.
Product Parameters Table:
Parameter Value
Material: Aluminium Alloy (6063-T6)
Profile Thickness: Main material wall thickness ≥ 3.0mm
Frame Visible Surface: Indoor: 46.5mm; Outdoor: 81.5mm
Total Profile Frame Thickness: 95mm
Glass Groove Width (Fan): 40mm
Standard Glass: 5+1.14PVB+5+21A+6LOW-E
Hardware: German Dunkenmotoren Push Rod Motor
Max Dimensions: Length up to 3000mm; area ≤ 4㎡
Opening Angle: 27°–52° depending on width
Sealing: Two layers of EPDM (automotive grade)
Surface Treatment: Fluorocarbon triple coating
Control Options: Remote control, manual button, smart voice control, backup power
Certifications: FSC, CE, ISO 9001, SGS
Warranty: Over 5 years
Product Features
High-Strength Frame: Made from 6063-T6 aluminum with a wall thickness of ≥3.0mm. It provides strong structural support.
Waterproof Sealing: Uses two layers of EPDM sealant. The adhesive is German Defender. It prevents water seepage.
Motorized Operation: Equipped with a German Dunkenmotoren pushrod motor. It supports windows up to 4 square meters.
Smart Control: Integrates with smart home systems. Includes remote control, voice control, and backup power.
Energy-Efficient Glass: Features 5+1.14PVB+5+21A+6LOW-E glass. It offers thermal insulation and UV protection.
Application Scenarios
Villas & Homes: Provides natural light and ventilation for attics or high ceilings.
Hotels: Enhance guest rooms with controlled daylight and fresh air.
Offices: Suitable for meeting rooms and common areas needing overhead light.
Outdoor & Exterior: Installs on roofs or sloped surfaces for weather-protected openings.
Warehouses & Workshops: Supplies ventilation in large spaces.
FAQ
Q: What type of aluminum is used?
A: We use 6063-T6 aluminum with a wall thickness of ≥3.0mm. It ensures high bending strength.
Q: How is the window sealed against water?
A: Two layers of automotive-grade EPDM sealant are applied. We use German Defender adhesive for a secure seal.
Q: What motor options are available?
A: The window uses a German Dunkenmotoren push rod motor. Stroke and opening angle vary based on width.
Q: Can this skylight be controlled remotely?
A: Yes. It includes a remote control, manual button, smart voice control, and a backup power supply.
Q: What is the warranty period?
A: The warranty is over 5 years. The product is certified by CE, ISO 9001, and SGS.
Product Parameters Skylight
Indoor frame visible surface 46.5mm
Outdoor frame visible surface 81.5mm
Indoor fan visible surface 121.5mm
Outdoor fan visible surface 87mm
Indoor total visible surface 173mm
The total thickness of the profile frame is 95mm
High precision 6063-T6 aluminum profile with a main material wall thickness of ≥ 3.0mm
Width of insulation strip
Standard Configure
Screen window
0.8 Black Diamond Mesh (Fixed) Upgraded to Aimeijie Weaving Mesh 28 Mesh (Fixed)
Hardware
German Dunkenmotoren Push Rod Motor
Open size and maximum load-bearing capacity
The maximum length is 3000mm,
Width (motor installation) 660mm-3000mm, area cannot exceed 4 square meters
Width (with motor installed) between 660mm-699mm, using a 100 stroke motor with an opening angle of 27 degrees
Width (with motor installed) between 700mm-749mm, using a 150 stroke motor with an opening angle of 44 degrees
Width (with motor installed) between 750mm-779mm, using a 150 stroke motor with an opening angle of 37 degrees
Width (with motor installed) between 780mm and 3000mm, using a 200 stroke motor with an opening angle of 52-7 degrees
(In general, the larger the width, the smaller the opening angle)
Glass
Box:
Glass groove width:
Fan:
Glass groove width: 40
Standard version width: 39
Aluminum spacer color: Silver aluminum spacer
Add upgraded aluminum spacer color: black aluminum spacer
Fan glass: 5+1.14PVB+5+21A+6LOW-E
Surface Treatment
Surface treatment method: fluorocarbon triple coating
Pink brand: domestic/imported monochrome/regular color
Add and upgrade dual color/custom color
Rubber strip brand: domestic/imported: Wingkay， can be upgraded to Haida
Crimping
Process configuration includes a rainwater sensor, smart home wireless voice control, backup power supply, remote control, and manual buttons
Craft Features
1) Selection of profiles: High quality aluminum profiles 6063-T6 from well-known manufacturers are used to ensure their bending strength.
2) 45-degree splicing angle: Adopting the method of corner gluing, inject Antai waterproof corner glue into the slot.
3) Waterproof sealing device: equipped with two layers of sealant
Using high-quality sealing strips of Haida EPDM (automotive grade),
Enduring harsh weather conditions ranging from -50 ℃ to 120 ℃,
Use for 30 years without labor, ensuring waterproof sealing of the sunroof.
Adhesive: Made with German Defender (specialized adhesive for adhesive strips)
Ensure no water seepage.
